F/I-SAPT: Functional Group and/or Intramolecular SAPT¶
Code author: Robert M. Parrish
Section author: Robert M. Parrish
Module: Keywords, PSI Variables, FISAPT
The FISAPT module provides two extensions to standard SAPT theory to allow for (1) an effective two-body partition of the various SAPT terms to localized chemical functional groups (F-SAPT) and (2) a means to compute the SAPT interaction between two moieties within the embedding field of a third body (I-SAPT). F-SAPT is designed to provide additional insight into the chemical origins of a noncovalent interaction, while I-SAPT allows for one to perform a SAPT analysis for intramolecular interactions. F-SAPT and I-SAPT can be deployed together in this module, yielding “F/I-SAPT.” All F/I-SAPT computations in PSI4 use density-fitted SAPT0 as the underlying SAPT methodology. Interested users should consult the manual page for Ed Hohenstein’s SAPT0 code and the SAPT literature to understand the specifics of SAPT0 before beginning with F/I-SAPT0.
F-SAPT is detailed over two papers: [Parrish:2014:044115] on our much-earlier “atomic” SAPT (A-SAPT) and [Parrish:2014:4417] on the finished “functional group” SAPT (F-SAPT). An additional paper describes how to use F-SAPT to analyze differences under functional group substitutions [Parrish:2014:17386]. I-SAPT is explained in [Parrish:2015:051103]. There is also a reasonably-detailed review of the aims of A/F/I-SAPT and the existing state-of-the-art in the field in the introduction chapter on partitioned SAPT methods in Parrish’s thesis.
A video tutorial series for the use of the FISAPT module is available here. Specific videos in the series include:
F-SAPT#1. Describes the use of F-SAPT to analyze the distribution of the intermolecular interaction energy components between the various hydroxyl and phenyl moieties of the phenol dimer.
F-SAPT#2. Discusses how to plot the order-1 F-SAPT analysis with PyMol and perform a “difference F-SAPT” analysis
I-SAPT#1. Describes the use of I-SAPT to analyze the interaction between the two phenol groups in a 2,4-pentanediol molecule.
I-SAPT#2. Discusses how to plot the density fields and ESPs of the various moieties of the I-SAPT embedding scheme with PyMol
F/I-SAPT Options. Details all of the more-advanced options in the F/I-SAPT code (rarely needed).
The scripts discussed below are located in psi4/psi4/share/psi4/fsapt.
F-SAPT: A Representative Example¶
Below, we show an example of using F-SAPT0/jun-cc-pVDZ to analyze the distribution of the intermolecular interaction energy components between the various hydroxyl and phenyl moieties of the phenol dimer. This example is explicitly included in fsapt1. A video lecture explaining this example is available F-SAPT#1, while an additional video describing how to plot the order-1 F-SAPT analysis with PyMol and perform a “difference F-SAPT” analysis is available F-SAPT#2:
memory 1 GB
molecule mol {
0 1
O -1.3885044 1.9298523 -0.4431206
H -0.5238121 1.9646519 -0.0064609
C -2.0071056 0.7638459 -0.1083509
C -1.4630807 -0.1519120 0.7949930
C -2.1475789 -1.3295094 1.0883677
C -3.3743208 -1.6031427 0.4895864
C -3.9143727 -0.6838545 -0.4091028
C -3.2370496 0.4929609 -0.7096126
H -0.5106510 0.0566569 1.2642563
H -1.7151135 -2.0321452 1.7878417
H -3.9024664 -2.5173865 0.7197947
H -4.8670730 -0.8822939 -0.8811319
H -3.6431662 1.2134345 -1.4057590
--
0 1
O 1.3531168 1.9382724 0.4723133
H 1.7842846 2.3487495 1.2297110
C 2.0369747 0.7865043 0.1495491
C 1.5904026 0.0696860 -0.9574153
C 2.2417367 -1.1069765 -1.3128110
C 3.3315674 -1.5665603 -0.5748636
C 3.7696838 -0.8396901 0.5286439
C 3.1224836 0.3383498 0.8960491
H 0.7445512 0.4367983 -1.5218583
H 1.8921463 -1.6649726 -2.1701843
H 3.8330227 -2.4811537 -0.8566666
H 4.6137632 -1.1850101 1.1092635
H 3.4598854 0.9030376 1.7569489
symmetry c1
no_reorient
no_com
}
set {
basis jun-cc-pvdz
scf_type df
guess sad
freeze_core true
}
energy('fisapt0')
This file runs a DF-HF computation on the full dimer using PSI4‘s existing
SCF code. The monomer SCF computations are performed inside the FISAPT module,
following which a complete DF-SAPT0 computation is performed. Additional bits of
analysis are performed to generate the order-2 partition of the SAPT terms to
the level of nuclei and localized occupied orbitals – this generally does not
incur much additional overhead beyond a standard SAPT0 computations. The
nuclear/orbital partition data is written to the folder fsapt/ in the same
directory as the input file (this can be changed by FISAPT_FSAPT_FILEPATH).
One obtains the desired F-SAPT partition by post-processing the data in
fsapt/. Within this dir, the user is expected to provide the ASCII files
fA.dat and fB.dat, which describe the assignment of atoms to chemical
functional groups using 1-based ordering. E.g., for the problem at hand,
fA.dat contains:
OH 1 2
PH 3 4 5 6 7 8 9 10 11 12 13
while fB.dat contains:
OH 14 15
PH 16 17 18 19 20 21 22 23 24 25 26
At this point, the user should run the fsapt.py post-processing script in
the fsapt directory as:
>>> fsapt.py
This will generate, among other files, the desired functional-group partition in
fsapt.dat. For our problem, the bottom of this file contains the finished
partition:
Frag1 Frag2 Elst Exch IndAB IndBA Disp Total
OH OH -8.425 6.216 -0.583 -1.512 -1.249 -5.553
OH PH 1.392 0.716 0.222 -0.348 -0.792 1.189
PH OH -2.742 0.749 -0.147 -0.227 -0.674 -3.040
PH PH 0.680 2.187 0.007 -0.208 -2.400 0.266
OH All -7.033 6.931 -0.362 -1.860 -2.040 -4.364
PH All -2.062 2.936 -0.140 -0.435 -3.074 -2.774
All OH -11.167 6.965 -0.730 -1.739 -1.923 -8.594
All PH 2.072 2.903 0.229 -0.556 -3.191 1.456
All All -9.095 9.867 -0.501 -2.295 -5.114 -7.138
Note that the assignment of linking sigma bond contributions is a small point of
ambiguity in F-SAPT. The fsapt.dat file presents the “links-by-charge”
assignment at the top and the “links by 50-50” assignment at the bottom. We
generally prefer the latter, but both generally give qualitatively identical
energetic partitions.
Users should check the files fragA.dat and fragB.dat to ensure that
there is not too much charge delocalization from one fragment to another. This
is presented in the “Orbital Check” section in these files – a value larger than
0.1 docc is an indication that the picture of localizable functional groups may
be breaking down. We also strongly discourage the cutting of double,
triple, or aromatic bonding motifs when partitioning the molecule into fragments
– cuts across only simple sigma bonds are encouraged.
Order-1 Visualization with PyMol¶
The fsapt.py script above also generates a number of order-1 .pdb files
that can be used to get a quick qualitative picture of the F-SAPT partition. The
preferred way to do this is to use PyMol to make plots of the molecular geometry
with the atoms colored according to their order-1 F-SAPT contributions. We have
a set of template .pymol scripts to help with this process. These can be
obtained by running:
>>> copy_pymol.py
and then in PyMol:
>>> @run.pymol
This last command runs all of the individual .pymol files (e.g.,
Elst.pymol), which in turn load in the molecule and order-1 analysis
(contained in the .pdb file), set up the visualization, and render a
.png image of the scene. Generally the view orientation and some specific
details of the .pymol files require some small tweaks to permit
publication-quality renderings.
Difference F-SAPT Analysis¶
For those interested in taking the differences between two F-SAPT partitions
(e.g., to see how a substituent modulates a noncovalent interaction), we have
the fsapt-diff.py script to help with this. This is invoked as:
>>> fsapt-diff.py source-fsapt-dir1 source-fsapt-dir2 target-diff-fsapt-dir
Where the use has already performed fsapt.py analysis using the same
functional group names in source-fsapt-dir-1 and source-fsapt-dir-2. The
difference F-SAPT partition entries are computed as \(E^{\Delta} = E^{1} -
E^{2}\), and the geometries for order-1 .pdb visualization files are taken
from system 1.
I-SAPT: A Representative Example¶
Caution
As of April 2018, you can’t specify molecule fragments with an unphysical multiplicity like the singlet OH fragments in the molecule below, especially as (again in the example below) the overall molecule needs to be a singlet, which PSI4 doesn’t at present let be set independently. For situations like this, use the temporary input pattern in isapt1 .
Below, we show an example of using I-SAPT0/jun-cc-pVDZ to analyze the interaction between the two phenol groups in a 2,4-pentanediol molecule. This example is explicitly included in isapt1. A video lecture explaining this example is available I-SAPT#1, while an additional video describing how to plot the density and ESP fields from the I-SAPT embedding procedure is available I-SAPT#2:
memory 1 GB
molecule mol {
0 1
O 0.39987 2.94222 -0.26535
H 0.05893 2.05436 -0.50962
--
0 1
O 0.48122 0.30277 -0.77763
H 0.26106 -0.50005 -1.28451
--
0 1
C 2.33048 -1.00269 0.03771
C 1.89725 0.31533 -0.59009
C 2.28232 1.50669 0.29709
C 1.82204 2.84608 -0.29432
C 2.37905 4.02099 0.49639
H 3.41246 -1.03030 0.19825
H 2.05362 -1.84372 -0.60709
H 1.82714 -1.16382 0.99734
H 2.36243 0.42333 -1.57636
H 3.36962 1.51414 0.43813
H 1.81251 1.38060 1.28140
H 2.14344 2.92967 -1.33843
H 3.47320 4.02400 0.48819
H 2.03535 3.99216 1.53635
H 2.02481 4.96785 0.07455
symmetry c1
no_reorient
no_com
}
# => Standard Options <= #
set {
basis jun-cc-pvdz
scf_type df
guess sad
freeze_core true
fisapt_do_plot true # For extra analysis
}
energy('fisapt0')
This is essentially the same input as for F-SAPT, except that the molecular system is now divided into three moieties – subsystems A and B whose intramolecular interaction we wish to compute, and a linking unit C. This file runs a DF-HF computation on the full system using PSI4‘s existing SCF code. At the start of the FISAPT code, the occupied orbitals are localized and divided by charge considerations into A, B, C, and link sets. By default, linking sigma bonds are assigned to C (this can be changed by the FISAPT_LINK_ASSIGNMENT options). Then, non-interacting Hartree–Fock solutions for A and B are optimized in the embedding field of the linking moiety C. At this point, A and B are not interacting with each other, but have any potential covalent links or other interactions with C built in by the embedding. A standard F-SAPT0 computation is then performed between A and B, yielding the I-SAPT interaction energy. Any F-SAPT considerations are also possible when I-SAPT is performed – F and I are completely direct-product-separable considerations.
Cube File Visualization with PyMol¶
Setting FISAPT_DO_PLOT true above generates a set of .cube files
containing the densities and ESPs of the various subsystems in the I-SAPT
embedding procedure. These can be used to gain a detailed understanding of the
intermolecular partition and the polarization between non-interacting and
Hartree–Fock-interacting moieties. We have developed a set of template
.pymol scripts to help with this process. These can be obtained by running:
>>> copy_pymol2.py
and then in PyMol:
>>> @run.pymol
This last command runs all of the individual .pymol files (e.g.,
DA.pymol), which in turn load in the molecule and cube file data
(contained in the .cube file), set up the visualization, and render a
.png image of the scene. Generally the view orientation and some specific
details of the .pymol files require some small tweaks to permit
publication-quality renderings.
Adding Point Charges to F/I-SAPT Computations¶
Point charges can be added to the interacting subsystems A and B as well
as to the linking fragment C. Briefly, the interaction between the point charges in A(B)
and fragment B(A) enters the SAPT0 interction energy. It explicitly affects in the electrostatics
and induction components, and implicitly affects other SAPT0 components by polarizing the orbitals.
If point charges are present in both subsystems A and B, an additional charge-charge interaction
term is also added to the electrostatic energy. When point charges are assigned to subsystem C, the point
charges in C only polarize the orbitals in both fragment A and B. However, the presence of charges in C does not
directly contribute to the SAPT0 interaction energy.
Examples fsapt-ext-abc and fsapt-ext-abc2 illustrate the use of point charges in F/I-SAPT procedure.
F/I-SAPT Keywords¶
The input files described above cover roughly 90% of all F/I-SAPT analyses. For more delicate or involved problems, there are a large number of user options that permit the customization of the I-SAPT subsystem partition, the convergence of the IBO localization procedure, numerical thresholds, etc. We have an entire video tutorial devoted to F/I-SAPT Options . Direct source-code documentation on these options is available here.
Additional Notes¶
Caution
In constrast to Ed Hohenstein’s SAPT0 code, FISAPT uses the -JKFIT auxiliary basis sets for all Fock-type terms (e.g., electrostatics, exchange, induction, and core Fock matrix elements in exchange-dispersion), and the -RI auxiliary basis sets only for the dispersion term. Ed’s code uses the -RI basis sets for all SAPT terms, which can be problematic for heavy elements. As such, Ed’s SAPT0 code will yield slightly different results than FISAPT. The differences should be very minor for up to and including second-row elements, after which point one needs to use the DF_BASIS_ELST option in Ed’s code to provide an accurate result.
